보행자 감지 01
EYETECH
#입출입감지 #보행자감지 #아이테크 #회전문 #스윙도어 #EYETECH #EYE TECH
COMFORT SENSOR FOR AUTOMATIC SWING AND REVOLVING DOORS
THE ADDITIONAL PROTECTION
zoom을 이용한 온라인 미팅신청
문의하기
THE ADDITIONAL PROTECTION
기술 | 배경인식가능한 활성적외선 | 감지영역 | 0.7 m ~ 2.5 m |
---|---|---|---|
모듈의 경사각 | 0° - 5° - 10° - 15° - 20° - 25° | 레이저 빔의 높이(2m기준) | 0.13 m |
감지모드 | Presence (and movement) | 응답시간 | < 50 ms |
공급전압 | 릴레이 아웃풋 : 12 ~ 24 V AC/DC ±10% 트랜지스터 아웃풋 : 12 ~ 30 V DC ±10% |
주파수 | 50 ~ 60 Hz |
소비전력 | Master ON : 60 mA maximum Slave ON : 40 mA maximum Master OFF : 300 mA maximum Slave OFF : 30 mA maximum |
기본출력 | Switch-over relay (voltage free contact) |
출력 | Switch-over relay (voltage free contact) Relay contact ratings (max voltage) 60 V DC /125 V AC Relay contact ratings (max current) 1 A (resistive) Max. switching power 30 W (DC) / 60 VA (AC) |
Optional output | Open collector transistor max. voltage 30 V DC max. current 100 mA (protection against short-circuits) |
표준승인 | EN ISO 13849-1:2008 Performance level «c» CAT.2 (under the condition that the door control system monitors the sensor at least once per door cycle) |
사용가능온도 | –20°C ~ +50°C |
기술 | 배경인식가능한 활성적외선 |
---|---|
감지영역 | 0.7 m ~ 2.5 m |
모듈의 경사각 | 0° - 5° - 10° - 15° - 20° - 25° |
레이저 빔의 높이(2m기준) | 0.13 m |
감지모드 | Presence (and movement) |
응답시간 | < 50 ms |
공급전압 | 릴레이 아웃풋 : 12 ~ 24 V AC/DC ±10% 트랜지스터 아웃풋 : 12 ~ 30 V DC ±10% |
주파수 | 50 ~ 60 Hz |
소비전력 | Master ON : 60 mA maximum Slave ON : 40 mA maximum Master OFF : 300 mA maximum Slave OFF : 30 mA maximum |
기본출력 | Switch-over relay (voltage free contact) |
출력 | Switch-over relay (voltage free contact) Relay contact ratings (max voltage) 60 V DC /125 V AC Relay contact ratings (max current) 1 A (resistive) Max. switching power 30 W (DC) / 60 VA (AC) |
Optional output | Open collector transistor max. voltage 30 V DC max. current 100 mA (protection against short-circuits) |
표준승인 | EN ISO 13849-1:2008 Performance level «c» CAT.2 (under the condition that the door control system monitors the sensor at least once per door cycle) |
사용가능온도 | –20°C ~ +50°C |
Data sheet
User guide
Mechanical drawing
인증서